
    Below are the commands with Jed files icluded in this folder

Just put the xc3sprprog.exe in the C: along with the two JED files for the TF330 rev3 , 
I have put the `Burst mode` and `Main` jeds here as if the Burst mode does not
work you can reflash back to the Main one

Use the Diagram in the FTDI PDF to correctly connect the colour labled leads to the
 JTAG header on the TF330
You do not need to connect to the CD32 to program the TF330, if you connect the 3.3v lead it will
work.


Just pick then copy and paste the file command you want to flash
the TF330 rev3 with  below into a command window at C:/ and hit enter

When it has finished programming it will go back to the C:/ prompt

             USB to Serial ftdi TF330 rev3

xc3sprog.exe -c ftdi -p 0 tf330r3_main_top.jed:w

xc3sprog.exe -c ftdi -p 0 tf330r3_Burst3.jed:w

